Skip to content

Free UK Delivery On All Orders Over £40

Piercing Jewellery Size Guide

This guide shows you what to measure for your piercing, with pictures for ear, eyebrow, belly, nose, face and nipple piercings.

Last updated 6 October 2026. Written by the Camden Body Jewellery team. How we check our jewellery.

Close-up pictures show examples of where jewellery can sit. They do not show the exact item you will buy. Your fit may look different.

Want to understand the size numbers? Read piercing jewellery sizes explained: gauge to mm chart. The article explains the terms; this page shows you what to measure.

Not sure which size to buy? Start with jewellery that fits you well. This guide shows you what to measure.

There is no one size for everyone. Your body and the place of your piercing affect the fit. A piercer is a person trained to fit piercing jewellery. Ask one if you are not sure.

What do I measure?

Use a ruler marked in millimetres (mm). Use the size your piercer gave you, if you know it.

Ring: width inside

This is called the inner diameter. Measure straight across the space inside a ring that fits. Do not count the metal. For an oval ring, check the inside height and width too.

Measure inside edge to inside edge
Inside width of a ring · Picture is not actual size

Stud or straight bar: bar length

Measure the part between the top and the back or ball. Do not count the ends or screw threads. This is the part that sits in the piercing.

Measure the bar, excluding its ends
Bar length, without the ends · Picture is not actual size

Curved bar: straight gap

Measure the straight gap between the inside faces of the ends. Do not measure along the bend. Do not count the balls or gems.

Measure straight across, not along the curve
Straight gap, not the bend · Picture is not actual size

Gauge means thickness

This is how thick the bar or ring is. It is not its length or inside width. Match the thickness you already wear.

Gauge means thickness
Gauge: bar thickness · Picture is not actual size

See the full gauge to mm chart in our sizes guide.

These numbers explain size names. They do not tell you which one fits your body. Do not force a thicker bar into a hole.

How far is the hole from the edge?

This can help with a hoop that goes around the edge of an ear or nostril. It is only a rough check. It does not tell you the exact ring size.

  1. Look in a mirror or ask someone to help.
  2. Hold a millimetre ruler next to the skin. Do not press on it.
  3. Read from the middle of the hole to the edge the hoop will go around.
  4. Ask a piercer to check the ring size and leave enough room.
Conch example: hole towards the outer ear edge HoleEar edge
Conch: hole to ear edge · Picture is not actual size
Nostril example: hole towards the lower edge HoleNostril edge
Nose: hole to lower edge · Picture is not actual size

Do not put a ruler into the hole. Do not take out healing jewellery to measure it. This edge check is not for studs, bars, septum, daith or other inner-ear piercings. Never measure a picture on your screen.

Purple marks show the area. These are simple pictures. The exact spot can vary.

Ear piercing example: small silver stud on the upper rim of the ear
EarExample

Ear size help

Choose your ear piercing below. A stud needs the right bar length. A ring needs the right width inside it.

Shop ear jewellery

Anti-tragus piercing example: curved bar with two small silver balls on the ridge above the earlobe
Anti-TragusExample

Anti-Tragus

This is the small bump above the ear lobe. Check the bar length or the width inside a ring that fits. Ask a piercer to check the size.

For the sizes most piercers use, see our anti-tragus piercing guide.

Shop anti-tragus jewellery
Daith piercing example: small silver ring through the inner fold just above the ear canal
DaithExample

Daith

This is the small fold just above the ear hole. Check the width inside the ring. The ring must have room around the fold. Do not measure to the outside edge of your ear.

For the sizes most piercers use, see our daith piercing guide.

Shop daith jewellery
Hidden helix piercing example: small chain dangle tucked inside the fold of the upper ear rim
Hidden HelixExample

Hidden Helix

This sits under the fold at the top of your ear. Check the bar length. The top and chain have their own sizes. They should not press into your ear.

Shop hidden helix jewellery
Industrial piercing example: long silver bar joining two holes across the top of the ear
IndustrialExample

Industrial

One long bar joins two holes in the ear. Check the bar between its two ends. Both holes must line up with the bar. Ask a piercer to check the fit.

For the sizes most piercers use, see our industrial piercing guide.

Shop industrial jewellery
Orbital piercing example: silver ring passing through two holes in the lower ear
OrbitalExample

Orbital

One ring joins two holes. It must fit both holes at once. Ask a piercer to check the ring size. The picture shows one example.

Shop orbital jewellery
Rook piercing example: curved bar with silver balls in the upper inner fold of the ear
RookExample

Rook

This is the fold near the top of the inner ear. Check the length of a curved bar that fits. If you want a ring, ask a piercer to check the size.

For the sizes most piercers use, see our rook piercing guide.

Shop rook jewellery
Tragus piercing example: small silver stud in the flap in front of the ear canal
TragusExample

Tragus

This is the small flap in front of your ear hole. For a stud, check the bar length and the size of the top. A ring needs a separate size check.

For the sizes most piercers use, see our tragus piercing guide.

Shop tragus jewellery
Snug piercing example: curved bar with silver balls through the inner ridge of the ear
Snug (Anti-Helix)Example

Snug (Anti-Helix)

This goes through the ridge inside the ear rim. Check the bar length. This part of the ear can vary a lot. Ask a piercer to check the fit.

For the sizes most piercers use, see our snug piercing guide.

Shop snug (anti-helix) jewellery

Back to the top

Eyebrow piercing example: curved bar with two silver balls at the outer end of the eyebrow
EyebrowExample

Eyebrow size help

Check the straight gap between the ends of a curved bar. Do not measure along the bend. Do not count the balls at the ends.

For the sizes most piercers use, see our eyebrow piercing guide.

Shop eyebrow jewellery

Back to the top

Belly area
Belly

Belly size help

For a curved belly bar, check the bar length. Do not count the gems, balls or hanging parts. For a belly clicker, check its inside height and width too.

Shop belly jewellery

Back to the top

Nose piercing example: small silver stud in the side of the nostril
NoseExample

Nose size help

Choose your nose piercing below. A nose stud, nose ring and bridge bar need different size checks.

Shop nose jewellery

Bridge piercing example: straight bar with silver balls across the top of the nose between the eyes
BridgeExample

Bridge

This sits across the top of the nose, between the eyes. Check the bar length. Ask a piercer to measure it. The width of your nose is not the bar size.

Shop bridge jewellery
Septum piercing example: silver ring with ball ends through the centre of the nose
SeptumExample

Septum

This sits under the middle of the nose. Check the width inside a ring that fits. Shaped rings may have a different inside height. Ask a piercer if you are not sure.

For the sizes most piercers use, see our septum jewellery guide.

Shop septum jewellery

Back to the top

Face piercing example: single silver stud below the centre of the bottom lip
FaceExample

Face size help

Choose the right spot below. Jewellery near the mouth should not rub your teeth or gums. Ask a piercer to check the fit.

Shop face jewellery

Bite piercing example: two silver studs below the bottom lip, one on each side
BiteExample

Bite

Bite can mean more than one style of lip piercing. The picture shows one example. Check each hole on its own. Two holes may need different sizes.

For the sizes most piercers use, see our snake bite piercing guide.

Shop bite jewellery
Cheek piercing example: two silver studs, one in each cheek
CheekExample

Cheek

This sits in the cheek. Cheek size can change with swelling. Ask a piercer to measure the bar for you. Do not guess from a lip bar size.

Shop cheek jewellery
Jestrum piercing example: vertical bar with silver balls through the centre of the top lip
JestrumExample

Jestrum

This goes up and down through the top lip. It uses a curved bar. Ask a piercer to check its length and the space at both ends.

Shop jestrum jewellery
Labret piercing example: single silver stud below the centre of the bottom lip
LabretExample

Labret

This sits below the bottom lip. Check the bar between the top and flat back. Do not count the top or back. A vertical labret is a different piercing.

For the sizes most piercers use, see our labret piercing guide.

Shop labret jewellery
Lip piercing example: small silver ring on the side of the bottom lip
LipExample

Lip

For a stud, check the bar length. For a ring, check the width inside it. Ask a piercer to check how it sits against your lip, teeth and gums.

For the sizes most piercers use, see our lip piercing guide.

Shop lip jewellery
Madonna piercing example: silver stud above the top lip, off to one side
MadonnaExample

Madonna

This sits above one side of the top lip. Check the bar between the top and flat back. A piercer can check the space inside your mouth.

Shop madonna jewellery
Medusa piercing example: silver stud in the centre above the top lip
MedusaExample

Medusa

This sits in the middle, above the top lip. Check the bar length. Do not count the top or flat back. Ask a piercer to check the fit.

For the sizes most piercers use, see our medusa piercing guide.

Shop medusa jewellery
Monroe piercing example: silver stud above the top lip, off to one side
MonroeExample

Monroe

This sits above the other side of the top lip. Check the bar between the top and flat back. A piercer can check the space inside your mouth.

Shop monroe jewellery
Tongue area
Tongue

Tongue

Check the straight bar between its two balls. A long bar used for swelling may be too long later. Ask a piercer before you choose a shorter one.

Shop tongue jewellery
Vertical labret piercing example: curved bar with one ball on the bottom lip and one below it
Vertical LabretExample

Vertical Labret

This goes up and down through the bottom lip. It uses a curved bar. Check the bar length with a piercer. It is not the same as a flat-back lip stud.

Shop vertical labret jewellery

Back to the top

Nipple area
Nipple

Nipple size help

Check the bar between its ends. Each side may need a different length. Ask a piercer to check the fit. If you want a ring, it needs its own size check.

Shop nipple jewellery

Back to the top

Measuring FAQ

How do I measure a ring?

Measure straight across the space inside a ring that fits, from inside edge to inside edge. Do not count the metal. For an oval ring, check the inside height and width too.

How do I measure a stud or straight bar?

Measure only the part between the top and the back or ball. Do not count the ends or screw threads. That is the part that sits in your piercing.

How do I measure a curved bar?

Measure the straight gap between the inside faces of the two ends. Do not measure along the bend, and do not count the balls or gems.

How do I measure a belly bar?

Measure the bar between its ends. Do not count gems, balls or hanging parts. For a belly clicker, check its inside height and width too.

What do I need to measure piercing jewellery?

A ruler marked in millimetres. Digital callipers are more accurate for thickness. Always measure a piece that already fits you well.

Can I measure jewellery while it is in my piercing?

No. Do not take out healing jewellery to measure it, and never put a ruler into the hole. Measure a spare piece that fits, or ask your piercer.

How do I check the distance from the hole to the edge?

Hold a millimetre ruler next to your skin without pressing, and read from the middle of the hole to the edge the hoop will go around. It is only a rough check for hoops on an ear or nostril edge, not an exact ring size.

Can you tell my size from a photo?

No. A photo cannot show your size accurately, and you should never measure a picture on your screen. A piercer can measure the fit, and we can explain the sizes on any of our product pages.

Back to the top

Still not sure?

Ask a piercer to measure the fit. Jewellery should not pinch or press into your skin.

If your piercing is new, sore, swollen or still healing, ask your piercer before you change it. Do not pick a shorter bar on your own.

We can explain the sizes on our product pages. We cannot tell your exact size from a photo.

Ask us about an item’s size

Read more: Choosing jewellery after healing; piercing questions.